Mining Inverter 200W

The OPS-260 is an IP66-rated ruggedized DC/AC inverter rated 180–220 W with pure sine wave output, for outdoor, defense, and railway applications where a standard enclosure cannot survive. Its sealed 67×249×135 mm housing (1.74 kg) is impervious to dust and high-pressure water jets.

Natural convection cooling — fully fanless — maximises reliability where maintenance access is limited. Input 12 to 110 Vdc, selectable 120 or 230 Vac output, 3000 Vrms isolation. Optional EN50155 railway version and EN45545-2 compliance available.

• Output: 180–220 W, 120 or 230 Vac single-phase pure sine wave, selectable 50/60 Hz, adjustable ±5%


• Enclosure: IP66 sealed — dust-tight and high-pressure water jet resistant; integrates OCS-260 inverter module


• Input: 6 voltage versions — 12, 24, 36, 48, 72, 110 Vdc (operating range 9.5–138 V); startup ≤10.2 V


• Dimensions & weight: 67×249×135 mm, 1.74 kg; convection cooling — fully fanless; output failure alarm; remote inhibit


• Standards: EN50155 railway version (optional); EN45545-2 fire & smoke certified; isolation 3000 Vrms

In mining and heavy industry applications, this inverter powers control electronics, sensors, communication systems, and safety equipment on mining vehicles and underground machinery operating from 24 V to 110 Vdc battery systems. Its sealed, fanless construction resists dust ingress and condensation in the wet, corrosive environments of underground mines and open-pit operations. Meets the stringent reliability demands of continuous-duty industrial equipment subject to high mechanical stress.