Train Inverter 220W

The OPS-260 is an IP66-rated ruggedized DC/AC inverter rated 180–220 W with pure sine wave output, for outdoor, defense, and railway applications where a standard enclosure cannot survive. Its sealed 67×249×135 mm housing (1.74 kg) is impervious to dust and high-pressure water jets.

Natural convection cooling — fully fanless — maximises reliability where maintenance access is limited. Input 12 to 110 Vdc, selectable 120 or 230 Vac output, 3000 Vrms isolation. Optional EN50155 railway version and EN45545-2 compliance available.

• Output: 180–220 W, 120 or 230 Vac single-phase pure sine wave, selectable 50/60 Hz, adjustable ±5%


• Enclosure: IP66 sealed — dust-tight and high-pressure water jet resistant; integrates OCS-260 inverter module


• Input: 6 voltage versions — 12, 24, 36, 48, 72, 110 Vdc (operating range 9.5–138 V); startup ≤10.2 V


• Dimensions & weight: 67×249×135 mm, 1.74 kg; convection cooling — fully fanless; output failure alarm; remote inhibit


• Standards: EN50155 railway version (optional); EN45545-2 fire & smoke certified; isolation 3000 Vrms

In railway train applications, this inverter powers onboard AC loads such as passenger lighting, HVAC controls, information displays, and door control systems. It complies with EN 50155 requirements for electronic equipment used in rolling stock, withstanding the wide input voltage fluctuations and transient disturbances typical of 24 V, 72 V, and 110 Vdc train bus systems. The fanless, vibration-resistant design ensures reliable long-term operation in passenger coaches and commuter trains.